Your Step-By-Step Guide To Cleaning A Dyson Vacuum

It's no surprise that many Dyson vacuums are worth every penny. From powerful suction to innovative design, Dyson takes the cake when it comes to high-performance and technologically advanced cleaning solutions. Even though these are powerhouse machines, they do need to be cleaned to ensure you have optimal suction, peak performance, and a long lifespan for your device. As an overview, you'll need to empty and clean your dirt bin, remove and clean the filter, clear hair from the roller bar, and reassemble your vacuum.

To avoid making this mistake when it comes to cleaning your Dyson and potentially shortening its lifespan, make sure you're cleaning your vacuum at least once a month, but more frequently if you have pets or children. Regular cleaning prevents the buildup of dust, hair, and debris that can significantly reduce suction power and overall efficiency. It's important, though, to take good care of cleaning your Dyson vacuum the right way to avoid damaging delicate components or voiding your warranty.

When working on cleaning your Dyson vacuum, going right to the source is best. Regardless of whether you have a cordless or corded machine, the primary culprits for reduced suction and performance are usually the brush bar and the filters. With how much it will cost to repair your Dyson vacuum cleaner, you want to take proactive steps to maintain its optimal condition and avoid unnecessary expenses.

According to Dyson, you'll want to make sure your vacuum is turned off (if it's a cordless vacuum) or unplugged (if corded). This helps prevent accidental activation during cleaning, keeping you and your fingers safe. Next, you'll need to empty the bin right into your trash can. You can use a damp (not soaked) cloth to wipe down the inside of the bin, but don't submerge it underwater or put it in the dishwasher.

You'll also need to remove the filter to give that a good clean. Remove the filter from the vacuum, shaking off any large dust particles in the trash. Rinse with water, squeezing out the dirty liquid every 20 seconds and repeating until all dirt has been removed. Give it one final squeeze and set it aside.

Cleaning the brush bar comes next. Most brush bars simply need to be cleaned of hair and other fibers (like carpet or clothing). You can do this with your fingers in most circumstances. However, if your Dyson has a soft roller cleaner head brush bar, you can wash it with water. Remove the soft roller bar from the vacuum by pushing the end cap up — once you've removed the roller bar, remove any trapped hair and fibers, then rinse the bar under your faucet. No need for soap here — cold water will do. Carefully squeeze out any remaining water and set aside.

Once you've pulled apart the main components of your Dyson vacuum and cleaned them, it's imperative to let them dry thoroughly before putting everything back together. While waiting for these parts to dry, you can continue to clean your Dyson vacuum by cleaning the exterior of the machine with a clean, damp cloth. Additionally, it's also best to check the hoses to make sure that there are no obvious clogs impacting vacuum performance. Once you're positive that everything is fully dry, reassemble your vacuum, ensuring that all parts are correctly aligned and securely fastened according to the instruction manual.