The Renter-Friendly Tip For A DIY Beadboard Accent Wall

A beadboard accent wall is not just a classy option for clean lines in your home. It can also completely transform a bare and lifeless space with its texture and charm. But while the classic look of beadboard can elevate any room, many renters are hesitant to take on such a project. They cannot be blamed though, as the fear of damaging walls, need for heavy tools, and expense often associated with beadboard installations make it seem out of reach for those living in temporary spaces. After all, drilling, nailing, or gluing beadboard to a rental's walls can leave unsightly marks that could result in costly repairs or losing your security deposit.

But there's no need to sacrifice style for practicality anymore thanks to a renter-friendly method, which allows you to achieve the timeless look of a beadboard accent wall without permanent damage or a hefty price tag. This provides renters an affordable and low-commitment way to transform their spaces using precut beadboard panels and removable Command Strips, one of the many unexpected ways to use these strips around the house.

This DIY works best because many renters often feel limited by the perception that beadboard projects require advanced carpentry skills or expensive professional installations. It's especially appealing because of its accessibility, as it doesn't require heavy tools, specialized knowledge, or weeks of labor. Plus, when it's time to move out, you can easily remove the panels without leaving a trace!

Creating a renter-friendly beadboard accent wall is easier than you might think. But before you dive in, make sure that you get the right measurements of the wall you'd like to upgrade. You'll also need to decide how high you want it to go if you're covering only a portion of the wall. For example, you might want to cover the bottom third of the wall for an elegant wainscoting effect. Once you get these down, it's time to head to your local hardware store to purchase beadboard panels. Lightweight MDF beadboard panels are a good choice since they are easy to handle and budget-friendly. You can ask a store associate to cut the panels to your specifications so you don't need to use cutting tools at home. If you don't want to deal with cutting, consider precut panels designed to fit standard wall dimensions.

Once you have your panels, it's time to prepare them for installation. Lay them flat and attach heavy-duty Command Strips to the back. Be generous with the strips and apply them across the bottom, top, and center of each panel for maximum adhesion. Once done, peel off the adhesive backing and carefully align the panel with your wall, then press firmly to ensure it adheres well.

This renter-friendly tip for your DIY beadboard accent wall is both practical and good for those looking to not dent their pockets. Precut panels cost around $34.98 at Lowe's, depending on material and size, while a 16-pair pack of heavy-duty Command Strips go for about $13.

While this DIY project is pretty simple and renter-friendly, be sure to take some precautions to ensure a smooth process. Make sure your wall is clean and dry before applying the panels since dust, grease, or even moisture can weaken the hold of adhesive and cause the panels to fall. You can use a damp cloth to wipe down the wall and allow it to dry completely before starting the process.

You should also check the weight limits of your Command Strips and avoid overloading them. Consider adding more of these strips for additional support if you're unsure whether the strips can hold the panels. Lastly, and most importantly, take care when removing the panels at the end of your lease. Command Strips are designed to be removable, but improper handling could still damage the paint. Remember to pull the strips slowly and at the correct angle based on the manufacturer's instructions to avoid this headache. By taking these simple precautions, you can enjoy one of the best renter-friendly DIY decor tricks to beautify your home without spending too much!