DIY A Funky Toilet Paper Holder Your Inner Child Will Love

If you are looking to redesign your bathroom or give an extra flair to a child's space, this idea is definitely one you should check out! Not only is it relatively simple to complete, but it will give your bathroom that imaginative touch you are looking for. Simply head to the garage and grab your old skateboard for this DIY funky toilet paper holder your inner child will love.

Yes, you read that right! This DIY repurposes a skateboard as a toilet paper holder, which can hold two toilet paper rolls. To start this project, you'll need to remove the wheels from the skateboard. Many skateboards come with grip tape on the top to help the skater stay on the board. However, if left on, it would cause you to scratch your hand every time you go to grab some toilet paper. Luckily, removing the grip tape is fairly straightforward. Grab a hair dryer and heat the top edges of the skateboard. Then, use a utility knife to pry the tape off the board gently. Continue this process down the length of the board. Afterward, you may need to sand the board to remove some stray tape or adhesive. Don't worry if the top of the board is a little sticky; you just want it to be evenly smooth. And if you don't have a skateboard around, no worries! Purchase a blank deck, like this Moose Blank Skateboard Deck from Amazon, and skip this step!

Picking the best toilet paper holder for your space can be an interesting design challenge. But once you see how easy it is to complete this DIY, deciding on the right style may be a whole lot easier. With your skateboard deck ready to go, grab your favorite peel-and-stick wallpaper design. There are many inexpensive colors and styles to choose from, like this funky Retro Neon Peel and Stick Wallpaper, making it simple to match your home's decor or to add an unexpected design statement. You only need enough to cover the length of the board, but if you end up with some extra scraps, check out these ways to make the most of your leftover peel-and-stick wallpaper.

Next, stick the wallpaper to the top of your board, and use an X-ACTO Utility Knife to trim the edges for a smooth finish. Use a pencil to poke through the four screw holes on each side of the board. Then, take your drill and add pilot holes on your wall, using the skateboard holes as a guide. Make sure you are holding the board level; otherwise, your final design will be crooked. Add anchors to the holes, then drill the skateboard to the wall. Finally, attach your toilet paper holders, like this GLNLQ Toilet Paper Holder, which also functions as a phone holder, to the front of the board, and your project is complete!

If you love this skateboard design, you could always continue it throughout the bathroom. For instance, use a second board to create a place for towels to hang after a shower. Or upcycle a couple of skateboards to create a shelving unit for towels and toiletries. If you have other bathrooms in your home that need an ingenious touch, look at these additional bathroom remodel ideas for more inspiration.