We may receive a commission on purchases made from links.

The Quick Fix For Saggy IKEA Dresser Drawers Before You Toss It Out

It can be incredibly disheartening to open up your dresser to find that the bottom panel of the drawer has once again slipped out of place or is continuing to sag. If you're in this situation, you might be worried that it's already time to purchase a replacement for the entire dresser. However, this might not be the case quite yet. Whether you have budget-friendly furnishings like the IKEA HEMNES set or a product from another brand, there's a simple fix you should try first that could save you a good chunk of change.

Advertisement

The quickest and most cost-effective trick for restoring a sagging drawer to working order is to purchase and install a set of repair wedges. For instance, you could buy the 100-pack of Canomo Plastic Furniture Repair Wedges on Amazon for $7. These small triangular pieces fit below the bottom panel of the drawer and prevent it from slipping out of its groove. Despite their small size, they provide a substantial amount of reinforcement that will increase your dresser's lifespan and allow you to put more weight in the drawers. They're also relatively easy to install and don't require any special tools. Once you've fixed up your dresser, you might also want to consider picking up some of the best IKEA products that will help you keep your closet organized.

Advertisement

Adding budget-friendly reinforcements to your drawers

Plastic furniture repair wedges make repairing a sagging drawer easy, whether the furnishing is from IKEA or any other brand. To add them to your dresser, begin by taking out the damaged drawers and turning them over. The wedges will sit below the bottom panel of a drawer and slip into the larger notch that was supposed to hold the panel in place. Simply attach them to the dresser with the provided screws and a screwdriver. Make sure the wedges are evenly spaced so that the weight of your clothes will remain evenly distributed. Avoid placing them too close to the corners to prevent splitting the wood. To avoid putting too much in the drawers, you might also want to consider the best dresser alternatives for your bedroom

Advertisement

If your dresser drawer requires further reinforcement or if the bottom panel is beginning to tear, you still might be able to save the fixture with some additional DIY fixes. If the sagging occurs in the middle of the drawer, consider installing adjustable plastic or metal reinforcement brackets, such as those found in the FRMSAET Drawer Repair Kit. If you have a torn or otherwise damaged drawer bottom, you can replace it entirely with a new cut of plywood. To do this, disassemble the entire drawer first. Since you'll be taking everything out, take the opportunity to figure out the best way to organize your dresser drawers. Make sure to use the old drawer bottom for measuring the replacement panel before you throw it out, then simply install the new piece.

Advertisement

Recommended

Advertisement