Give Your Dated Bathroom Countertop A Major Upgrade With Epoxy Paint

Renovating your bathroom countertops can take weeks and cost thousands of dollars, depending on your preferred style. You would also have to hire a professional to do the job, which could increase the price due to labor costs. However, instead of spending too much on replacing your dated countertops, there are affordable ways to update them without breaking the bank, like using epoxy spray paint.

TikTok user @lifewithhendrix's mom used epoxy to transform her daughter's dated bathroom countertops into sleek white countertops. Unfortunately, epoxy paint works only on even smooth surfaces, so if you have tile surfaces, it won't work as well.

Giving your bathroom a makeover doesn't have to cost too much — doing small projects will make your bathroom look brand-new. However, different remodeling rates can fit your budget. For example, the average price for renovating low-end countertops costs between $400 and $500, while higher-end countertops can cost between $4,000 and $5,000. The price depends on the size and materials used but excludes labor costs. On the other hand, following the aforementioned epoxy hack will cost you less than $30. Here's how to spruce up your countertops with epoxy paint.

Step-by-step tutorial

The easiest way to give your dated bathroom countertops a small makeover is by spray painting them. TikToker @lifewithhendrix's mom used white epoxy paint to beautify her daughter's bathroom. You can use the same or different colors to complement your bathroom's interior. The project takes a few hours, which is better than having a professional renovate your bathroom for weeks. You'll need cleaning cloths, sandpaper, nontoxic gentle cleanser, epoxy spray paint, masking tape, a sponge, and plastic sheets.

First, wipe down the countertops with a cleaning cloth or microfiber towel to remove dirt, dust, and grime. Use water or a surface cleaner to remove the dirt and allow the surface to dry completely. Then, tape off the surrounding area to prevent painting the walls and floors. Place the plastic sheets along the walls, the base of the sink, and the floors, and put masking tape on the faucet and knobs.

Next, sand down the surface so the paint sticks to the countertops. You want to sand down enough to scuff them but not damage them. After sanding, wipe off the dust with a clean microfiber cloth and use the nontoxic cleanser to clean the surface. Finally, apply two to three thin coats of epoxy paint to the countertops. Note that the paint will drip, so you'll want to use a sponge to dab and clean the drip. You'll need a few coats of paint, but allow the countertops to completely dry each time.

Tips on following the hack

The epoxy paint hack can be done by any DIYer, be it a beginner or an expert. If you're a beginner, you want to ensure that you work at a slow pace to get the best results. So, tape the plastic sheets properly to prevent painting any small crevices. You don't want to have to touch up the paint on your walls if you get epoxy paint on them — it'll only create more work for you. As you can see in the video, TikToker @lifewithhendrix's mom accidentally spray-painted the sides of the countertops where they met the wall.

Another tip to remember is to wear a mask to not breathe in the paint, especially if your bathroom has no windows. If you do have windows, open them to let fresh air in and help dry the paint. It's best to allow 20 minutes to pass by after you've applied the first coat, then three hours after the second coat. Always spray 10 inches away from the surface to prevent spraying a pool of paint in one area. One thing the TikTok video doesn't cover is a finish to the epoxy to avoid chipping. After the last coat, add a glossy finish to protect the epoxy layer, or wait until it's completely dry.

Recommended